AWQ-pH Combination pH/Redox/Temp sensor
Overview
Features
Details
Specifications
Case Studies and Downloads
Overview
The AWQ-pH sensor has been designed to perform under hard conditions, from pure mountain water with conductivity as low as 20 μS/cm, lakes and rivers (100 – 2000 μS/cm), seawater with conductivities of 50 mS/cm, to wastewater with conductivity higher than 200 mS/cm.
- pH : 0 to 14
- Redox: -1000 to +1000 mV
- T°C : -10°C to +50°C
- Combination pH/Redox/Temp sensor
- Digital Sensor: Modbus RS 485/SDI-12
- Internal Calibration Data Storage
- pH/ORP Cartridge
Features
Details
This sensor features long-life Plastogel® reference technology, increasing the lifetime of the probe and reducing the need to refill.
The AWQ-pH sensor has been designed for handheld and in-situ applications in some of the most difficult situations for a pH/ORP sensor in term of sensor resistance, quick response, minimal flow dependence and low power consumption.
Specifications
pH | |
Measurement Principle: | Combined electrode (pH/ref): special glass, Ag/AgCI ref. Gelled electrolyte (KCI) |
Range: | 0 – 14 pH |
Resolution: | 0.01 pH |
Accuracy: | ± 0.1 pH |
Redox | |
Measurement Principle: | Combined electrode (Redox/reference): Platinum tip, Ag/AgCI AgAgCl. Gelled reference (KCI) |
Range: | -1000 to +1000 mV |
Resolution: | 0.1 mV |
Accuracy: | ± 2 mV |
Temperature | |
Technology: | NTC Thermistor |
Range: | 0°C to 50°C |
Resolution: | 0.01°C |
Accuracy: | ± 0.5°C |
Response Time: | < 5 s |
Sensor | |
Interface: | Modbus RS-485 standard
SDI-12 optional |
Power supply: | 5 to 12 volts |
Current Draw: | Standby: 25μA |
Average RS485 (1 Hz): | 3.9 mA |
Average SDI12 (1 Hz): | 6.8 mA |
Current pulse: | 500 mA |
Storage Temperature: | 0°C to 60°C |
Protection: | IP 68 |
Dimensions: | |
Diameter: | 27/21mm |
Length: | 207mm |
Weight: | 350g (sensor and 3m cable) |
Material: | PVC, DELRIN, special pH glass, platinum, polyamide |
Maximum Pressure: | 5 bar |
Cable: | Coaxial armoured, Polyurethane, bare wire or Fischer connector |
Protection: | IP68 |
Case Studies and Downloads
Recommended Products
IoT Water Quality Monitoring Station
Select options
This product has multiple variants. The options may be chosen on the product page
MFR-NODE
Select options
This product has multiple variants. The options may be chosen on the product page
S-NODE
Select options
This product has multiple variants. The options may be chosen on the product page
Accessories