12 Series Ceramic Round (0.406″ Thickness) Plates
10.31 mm Ceramic Round Plates
The measurement of moisture transfer through the ceramic plate allows for the development of soil moisture retention curves, soil column, or pore water calculations and soil characteristics. Precision ceramics that feature uniform pore size, and inert raw materials, the Soil Moisture Equipment ceramics are used for research and industrial purposes.
12 Series Ceramic Round (0.406″ Thickness) Plates
Page Contents
12 Series Ceramic Round (0.406″ Thickness) Plates are available in 10 diameters for many applications, and in the following pressure and flow combinations:
- 0.5 Bar Standard Flow
- 1 Bar High Flow
- 1 Bar Standard Flow
- 2 Bar Standard Flow
- 2 Bar High Flow
- 3 Bar Standard Flow
- 5 Bar Standard Flow
- 15 Bar Standard Flow
| Air Entry Value | Flow Rate | Bubbling Pressure (psi) | Approximate Porosity (% Vol.) | Saturated Hydraulic Conductivity (cm/sec) | Maximum Pore Size (µm) | Flow Through ¼ Inch Plate (ml/hr/cm2/14.7 Psi) |
| 0.5 Bar | Standard | 7 to 9 | 50% | 3.11 x 10-5 | 6.0 | 180 |
| 1 Bar | High | 19 to 28 | 45% | 8.6 x 10-6 | 2.5 | 50 |
| 1 Bar | Standard | 20 to 30 | 34% | 7.56 x 10-7 | 1.7 | 5.0 |
| 2 Bar | Standard | 38 to 45 | 32% | 6.30 x 10-7 | 1.1 | 4.2 |
| 2 Bar | High | 32 to 42 | 38% | 6.93 x 10-7 | 1.3 | 4.6 |
| 3 Bar | Standard | 46 to 70 | 34% | 2.5 x 10-7 | 0.7 | 1.6 |
| 5 Bar | Standard | 80 | 31% | 1.21 x 10-7 | 0.5 | 0.7 |
| 15 Bar | Standard | 220 | 32% | 2.59 x 10-9 | 0.16 | 0.015 |
Each size is available with a selection of pressures and flow rates:
| Diameter | 1/2 bar | 1 bar | 1 bar High Flow | 2 bar | 3 bar | 5 bar | 15 bar |
| 0.625″ | 12.12.F (0606D00.5-B0.5M2) |
12.12.1 (0606D00.5-B01M1) |
12.12.1H (0606D00.5-B01M3) |
12.12.2 (0606D00.5-B02M1) |
12.12.3 (0606D00.5-B03M1) |
12.12.5 (0606D00.5-B05M1) |
12.12.15 (0606D00.5-B15M1) |
| 1.125″ | 12.14.F (0606D01-B0.5M2) |
12.14.1 (0606D01-B01M1) |
12.14.1H (0606D01-B01M3) |
12.14.2 (0606D01-B02M1) |
12.14.3 (0606D01-B03M1) |
12.14.5 (0606D01-B05M1) |
12.14.15 (0606D01-B15M1) |
| 1.625″ | 12.16.F (0606D01.5-B0.5M2) |
12.16.1 (0606D01.5-B01M1) |
12.16.1H (0606D01.5-B01M3) |
12.16.2 (0606D01.5-B02M1) |
12.16.3 (0606D01.5-B03M1) |
12.16.5 (0606D01.5-B05M1) |
12.16.15 (0606D01.5-B15M1) |
| 2.125″ | 12.18.F (0606D02-B0.5M2) |
12.18.1 (0606D02-B01M1) |
12.18.1H (0606D02-B01M3) |
12.18.2 (0606D02-B02M1) |
12.18.3 (0606D02-B03M1) |
12.18.5 (0606D02-B05M1) |
12.18.15 (0606D02-B15M1) |
| 2.625″ | 12.20.F (0606D02.5-B0.5M2) |
12.20.1 (0606D02.5-B01M1) |
12.20.1H (0606D02.5-B01M3) |
12.20.2 (0606D02.5-B02M1) |
12.20.3 (0606D02.5-B03M1) |
12.20.5 (0606D02.5-B05M1) |
12.20.15 (0606D02.5-B15M1) |
| 3.125″ | 12.22.F (0606D03-B0.5M2) |
12.22.1 (0606D03-B01M1) |
12.22.1H (0606D03-B01M3) |
12.22.2 (0606D03-B02M1) |
12.22.3 (0606D03-B03M1) |
12.22.5 (0606D03-B05M1) |
12.22.15 (0606D03-B15M1) |
| 4.125″ | 12.24.F (0606D04-B0.5M2) |
12.24.1 (0606D04-B01M1) |
12.24.1H (0606D04-B01M3) |
12.24.2 (0606D04-B02M1) |
12.24.3 (0606D04-B03M1) |
12.24.5 (0606D04-B05M1) |
12.24.15 (0606D04-B15M1) |
| 5.125″ | NA | 12.26.1 (0606D05-B01M1) |
12.26.1H (0606D05-B01M3) |
12.26.2 (0606D05-B02M1) |
12.26.3 (0606D05-B03M1) |
12.26.5 (0606D05-B05M1) |
12.26.15 (0606D05-B15M1) |
| 6.125″ | 12.28.F (0606D06-B0.5M2) |
12.28.1 (0606D06-B01M1) |
12.28.1H (0606D06-B01M3) |
12.28.2 (0606D06-B02M1) |
12.28.3 (0606D06-B03M1) |
12.28.5 (0606D06-B05M1) |
12.28.15 (0606D06-B15M1) |
| 10.875″ | 12.38.F (0606D11-B0.5M2) |
12.38.1 (0606D11-B01M1) |
12.38.1H (0606D11-B01M3) |
12.38.2 (0606D11-B02M1) |
12.38.3 (0606D11-B03M1) |
12.38.5 (0606D11-B05M1) |
NA |
Case Studies
-
No case studies found