Apogee Accessories

Accessories and configuration tools

Full technical specifications can be found on the Apogee Instruments Website

Accessories for sensors

• For mounting and levelling sensors:
  • Single Sensors
    • AL-100 levelling plate is used to ensure a level surface for solar radiation sensors when mounted on a flat surface. Compatible sensors include Apogee pyranometer, pyrgeometer, and quantum sensors.
    • AL-120 is an adaptable bracket for post or pole mounting (1.3” to 2.1” diameter) to provide a level mounting. With a spring fitted between the levelling plate and the bracket to ensure easy levelling using the build bubble level. Compatible sensors include the Apogee pyranometer, pyrgeometer, and quantum sensors.
    • AM-020: Apogee PVC Sensor Platform for positioning sensors on a short term basis on tabletops and similar surfaces. Does not offer any additional levelling
  • Dual Sensors:
    • AL-130 Albedometer mounting bracket provides mounts for the upward and downward pyranometer. With a pole mount option, the levelling plate includes a bubble mount to ensure a level installation.
    • AM-500 mounting bracket is perfectly designed for the mounting rod that comes with the net radiometer (AM-130).
  • Mounting brackets for sensors:
    • AM-400: Downward Mounting Accessory for Inverted Sensors. The AM-400 is marked with angle marks for easy, consistent installation.
  • Mounting rods for sensors:
    • AM-130: Mounting fixture for albedometer with an integrated levelling bubble and splitter for the SP-710-SS sensors.
    • AM-140: Mounting rod for the S2 series NDVI and PRI sensors with an integrated levelling bubble.
    • AM-240: Provides a mounting system for the above mounting rods, allowing the mounting to a pole or post either horizontally or vertically, allowing adjustment to ensure the sensor is level
  • Solar panel mounting bracket for albedometer:
    • AM-150: Compatible with the Apogee AM-130 as well as the SP-722-SS Modbus albedometer, the AM-150 is a versatile bracket for installation on solar panels for long term measurement of the albedo in solar arrays.

Accessories for meters

• Apogee meter brackets support both the integrated meters (MQ-100x and MP-100) and the meter with cable range (MQ-200, MQ-500, MU-200 and MP-200) for reliable spot-check of the measurements.
  • AL-210: Meter levelling plate / mounting bracket for integrated meters
  • AM-001: Meter mounting bracket for meters with sensors attached by cable
• Wands for use with meters with cable attached sensors.
  • AM-310: Telescopic Sensor wand
  • AM-320: Saltwater submersible Sensor wand
  • AM-400: Downward Mounting Accessory for Inverted Sensors
• Carrying case:
  • A protective carrying case the AA-100 is ideal for the transport and storage of for Apogee meters, sensors and accessories. With a convoluted foam insert, the AA-100 protective carry case reduces the risk of damage to your Apogee meters or sensors.
    Note: This case will fit the AM-310 telescopic wand but will not fit the AM-320 underwater wand.

Configuration accessories

The configuration accessories allow for Sensor configuration or programming, as well as troubleshooting, field use (retrieving data), or in research and classroom laboratories.

• Apogee USB Converters: The USB Converters are available in SDI-12 (AC-421) and Modbus (AC-422) versions, allowing for configuration and sample measurements before installation of the Apogee sensor. These convertors allow configuration to be performed using any terminal program, or Apogee DSI software (available from the Apogee website).

Data accessories

• The Apogee AC-110 replaces the AC-100 Communication Cable. Enabling the connection of an Apogee portable meter to a computer (either Windows or Mac). Contained within the AC-110 are the electronics required to convert the signal from the Apogee Meter into a USB signal that a computer will recognise. Directly connecting the handheld meter via a USB-C connection. The ApogeeAMS software (Windows compatible, XP and later; Mac compatible, 10.10 and later), used to interface Apogee meters with a computer, can be downloaded here.