AWQ-C4E Digital Conductivity/Salinity Sensor
Overview
Features
Details
Specifications
Case Studies and Downloads
Overview
The C4E sensor for measuring conductivity, salinity and temperature in water uses 4 electrodes for accurate measurements.
Designed as a plug and play system, the C4E sensor retains the calibration data within the sensor enabling easy exchange of the sensor for maintenance purposes.
With applications including wastewater, effluent and surface water monitoring, as well as use in sea water and drinking water, the Aqualabo C4E is a versatile sensor.
The sensor provides RS485 output and SDI-12 output options within the same sensor.
Features
Details
AWQ-C4E Conductivity/Salinity Sensor.
- 4 electrodes (2 graphite, 2 platinum)
- Range: 0 to 200 mS/cm
- Digital sensor: Modbus RS-485, SDI-12
- Robust and Watertight
The AWQ-C4E sensor uses 4 electrode technology: an alternating current of constant voltage is established between the primary pair of graphite electrodes. The secondary platinum electrodes allow for voltage regulation of the primary electrodes to reflect fouling.
The voltage measured between the primary electrodes is a function of the resistance of the material, and thus, the conductivity.
Specifications
Measurement: | |
Measurement Principle: | Conductivity sensor with 4 electrodes (2 graphite, 2 platinum) |
Measurement Range (conductivity) | 0-200 μS/cm
0–2000 μS/cm 0–20 mS/cm 0–200 mS/cm |
Resolution: | 0.01 to 1, depending on range |
Accuracy: | ±1% of the full range |
Measurement Range (salinity): | 5-60 g/Kg |
Measurement Range (TDS-KCl): | 0-133000 ppm |
Response Time: | < 5s |
Temperature Compensation: | NTC Thermistor |
Sensor Interface: | Modbus RS-485 (standard)
SDI-12 (optional) |
Measurement Frequency: | 1Hz |
Sensor Power Supply: | 5 to 12 volts DC |
Current Draw: | Standby: 25 μA
Average RS485 (1 measurement/second): 6.3 mA Average SDI-12 (1 measurement/second): 9.2 mA |
Current pulse: | 500 mA |
Sensor: | |
Operating Temperature: | 0°C to +50°C |
Storage Temperature: | -10°C to +60°C |
Dimensions: | |
Diameter: | 27 mm |
Length: | 177 mm |
Weight: | 300g (sensor and 3 meter cable) |
Material: | PVC, DELRIN, stainless steel |
Maximum Pressure: | 5 bar |
Connection: | 9 armoured connectors, polyurethane jacket, bare-wires or waterproof Fischer connector |
Protection: | IP68 |
Case Studies and Downloads
![AWQ-C4E Digital Conductivity/Salinity Sensor](https://ictinternational.com/wp-content/uploads/2023/05/AWQ-C4E-1024x703.jpg)
Recommended Products
![Water Quality Monitoring Station with Data Buoy](https://ictinternational.com/wp-content/uploads/2023/04/Water-Quality-Monitoring-Station-with-Data-Buoy-scaled-400x400.webp)
IoT Water Quality Monitoring Station
Select options
This product has multiple variants. The options may be chosen on the product page
![S-Node open to show battery and circuit board](https://ictinternational.com/wp-content/uploads/2023/04/S-Node-400x348.webp)
S-NODE
Select options
This product has multiple variants. The options may be chosen on the product page