RIM-7499 Rain Gauge
Precise and reliable calibrated rain gauge
The RIM-7499-STD (standard) comes with a lower specification funnel and calibration than the RIM-7499-BOM (Bureau Of Meteorology) version. The STD version is ultimately the ideal low-cost alternative to the BOM version. The lower cost RIM-7499-STD can however, be ordered with the higher specification 1% BOM calibration.
Rain falling on the 203mm collecting funnel is directed through a siphon control unit and discharges as a steady stream into a two-compartment bucket mounted in an unstable equilibrium. As each compartment fills, the bucket tilts alternately about its axis. Each tip forces a contact closure by magnetic means corresponding to 0.2 of rainfall. A calibration certificate is supplied with every RIM-7499 rain gauge.
| RIM-7499-BOM | RIM-7499-STD | ||
| Collector Diameter |
|
203mm (8’’) ± 0.2mm | |
| Resolutions | 0.2mm (RIM-7499-020-BOM)
0.25mm; (RIM-7499-025-BOM) 0.5mm (RIM-7499-050-BOM) (0.01” & 0.02” to special order) |
0.2mm (RIM-7499-020-STD)
0.25mm; (RIM-7499-025-STD) 0.5mm (RIM-7499-050-STD) |
|
| Accuracy | ±2% to 200mm/hr.
±3% to 380mm/hr. |
±3% to 380mm/hr.
Can measure up to 347mm/hr (4%) |
|
| Contacts |
Two normally open magnetically actuated reed switches. Individual protection built-in |
||
| Resolution |
1.24 μm |
||
| Reed Switch Rating |
50V AC/DC @0.5A non-inductive |
||
| Closure Timing |
50ms min.; 150ms max.; Max bounce time 0.75ms; up to 500mm/Hr |
||
| Termination |
Screw termination (2.5mm²) |
||
| Heating Option |
12 or 24V AC/DC (48W max) operation with electronic thermostatic control (P/N 7499-TCH); Please specify operating voltage when ordering. |
||
| Data Logger Option |
Several models available depending on application requirements. Some data loggers may be installed within the body of the rain gauge. |
||
| Dimensions | |||
| Height: |
300mm |
||
| Body Diameter |
230mm |
||
| Base Diameter |
280mm |
||
| Net Weight |
5.5kg |
||
| Shipping Weight |
7kg |
||
| Materials |
|
||
| Collector |
Copper |
||
| Jacket |
Stainless Steel |
||
| Base |
Cast Marine Grade Aluminium |
||
| Bucket |
Gold Plated Brass |
||
| Bridge |
Anodised Marine Grade Aluminium |
||
| Switch Holder |
Delrin |
||
| Fasteners |
Stainless Steel |
||
| Mounting Accessory |
A rugged mounting pedestal that elevates the collection RIM 1m above ground level (P/N RIM-7499-Stand) |
||
