Save time by automating sample loading for the Ampha Z32. With the Autosampler you can process up to 192 samples per run, giving you time back to focus on other important aspects of your project. The fully automated procedure includes sample loading, measuring and data recording.
The Autosampler was designed to comply with our customer‘s needs. A proprietary air resuspension feature enables a homogeneous distribution of particles for the measurement. This feature is crucial for an accurate analysis of quickly sedimenting cells, such as pollen.
Figure 2: The examples compare a 30 second measurement with a 2 minute measurement, including loading time and air bubble purge for 24 and 96 samples.
Save up to 4.4 hours of manual sample loading for 96 samples.
■ Process 1 – 192 samples
■ Wash options include liquid flush or air bubble purge to minimise cross contamination
■ Select your preferred type of 96 deep-well plate
|Number of Samples:||1 – 192|
|Chip Compatibility:||AmphaChip 80μm, 120μm and 250μm
(Compatibility with other chips is in development)
|Microtiter Plate Compatibility:||Standard (ANSI) 2ml 96-deepwell plates. Max height: 44mm
Note: U-shaped wells are recommended over V-shaped wells
|Maximum Fill Height:||1.8ml|
|Compatible Liquids:||All Amphasys measurement buffers
AmphaClean for cleaning protocol
Note: To prevent foam formation, addition of detergents is not recommended
|Resuspension Time:||0-60 seconds, default = 10 seconds|
|Resuspension:||Proprietary air flow feature, allowing optimised resuspension time based on particle size|
|Carry Over:||< 0.2% with air bubble purge|
|Wash Option:||Option to flush tubing between samples|
|Regulatory Compliance:||CE (2006/95/EC and 2004/108/EC)|
|Power Requirements:||24V DC (external power adapter 110-230V AC)|
|Dimensions (W x H x D):||310 x 215 x 200mm|