The YDOC Remote Monitoring System is comprised of a YDOC ML- series data logger, solar charge controller, 7.2Ah 12 volt battery and a sensor bus bar; all enclosed in an IP66 rated, UV stable box designed for installation in a range of environmental conditions.
The data logger can acquire physical signals by 2 current loop inputs, 2 voltage inputs, 1 potentiometer input and 3 digital inputs. More or special inputs can be added by means of internal stackable option boards/converters.
The data logger is provided with one serial port to capture measurements from ASCII, MODBUS, NMEA or SDI-12 compatible sensors. External sensors can be powered by the data logger itself. Up to 8 mathematical channels are available to calculate meaningful engineering values derived from sensor input values (e.g. a polynomial to calculate a flow from a stream level). Supports up to 8 aggregation channels (e.g. to record 2 or 10 minute wind-speed averages sampled at 1Hz).
Logged data can be pushed to a central host by HTTP(S), FTP(S), e-mail, secure TCP or MQTT at configurable intervals and optionally by satellite as well (Iridium SBD).
The ML-x17 is available with 4 different cellular modems:
• ML-217: 2G Global
• ML-317: 3G Global with 2G fall-back
• ML-417: 4G Europe with 2G fall-back
• ML-N417: 4G North-America with 3G fall-back
Data Logging | |
Logging Interval | 1 second to 1 day Regular, alarm and independent intervals Daily operation time bracket (e.g. 07:00AM to 20:00PM or 21:00PM – 06:00AM) |
Data Storage | 4GB MicroSD card for data and picture storage |
Data Upload | 1 minute to 1 day intervals Regular and alarm intervals Direct push on alarm raise and fall Daily operation time bracket (e.g. 07:00AM to 20:00PM) |
Data upload format | Native TXT, JSON or CSV log files by HTTP(SSL/TLS), FTP (TLS Explicit), e-Mail (SMTP), secure TCP (AES-128) or MQTT |
Picture upload | JPG pictures by HTTP(S), FTP(S), e-Mail, TCP or MQTT |
Satellite | SBD messages by Iridium satellite modems (960x) |
Alarms | Alerts by SMS, e-Mail and MQTT Open collector output (max. 100mA sink current) |
Internal Sensors | Battery (voltage and rest capacity) Processor temperature GSM signal strength |
Analog Inputs | 2x current loop inputs (0/4 to 20mA, 150 Ohm impedance) 2x voltage inputs (0 to 10V) 1x potentiometer input (max. 10M Ohm) (12bit resolution & <0.1% FS accuracy) |
Digital Inputs | 3x state, pulse or counter (max. 10kHz) (0 to 5V) |
Serial Input | (1x RS-232, RS-485 or SDI-12) SDI-12 (up to 15 devices, max 20 channels per device) MODBUS RTU/ASCII (read registers from up to 15 slaves) NMEA-0183 (standard and custom sentences) ASCII (sensors autonomously outputting readable lines of numeric values) |
Derived Inputs | 8x calculation channels, using mathematical operators and functions (a/o cos, sin, atan2, ln, sqrt) 8x aggregation channels, logging minimums, maximums, averages, gusts and standard deviations sampled at 1Hz max. |
Accessory Port | (1x RS-232 & 5V excitation, to connect and power a GPS receiver, Iridium SBD modem, JPG camera or TFT-display) |
Built-in cellular modem (4 different models) | ML-217 2G (Quad-band GPRS) ML-317: 3G (Penta-band & Quad-band GPRS fall-back) ML-417: 4G EU (B1/B3/B7/B9/B20) & GPRS (900/1800) ML-N417: 4G NA (B2/B4/B5/B12/B13) & 3G (850/1900) External GSM antenna included |
SIM card | Not included, 2FF Mini (Class B) SIM card slot |
Configuration | USB (local) or secure TCP tunnel (remote) |
Power consumption | 250mA@3.6V average operating current during 20 to 60 second cellular communication 100uA@3.6V sleep current |
Power supply | 6Ah Solar Charge Controller
7.2Ah 12V battery Logger: 8 to 30V DC input and 3x AA NiMH charger |
Enclosure | LI/DC: IP68 (30min@2m), 130x120x85mm, 460g |
Operating range | -30°C to +75°C |