EnviroPro® sub-surface Soil Probes have been carefully engineered to be accurate, long-life, maintenance-free instruments suitable for all soil types. Their design employs clever techniques to correctly compensate moisture measurements for variations in salinity, as well as compensating moisture and salinity measurements for temperature variations, something not observed in any competitor probes.
Utilising the EnviroPro in a custom IoT (Internet of Things) configuration
Depending on the desired lengths, available SNiPs (Sensor Node Integrated Packages) for LoRaWAN or CAT-M1 communication of real-time soil moisture measurement include:
In addition, The SNiP-SPW2 is comprised of three sensors – 1 DBS60 Band Dendrometer, 1 Atmos-14 and 1 EP100GL-08 EnviroPro (80cm Length), with the option of being extended to support an additional sensor.
EnviroPro probes have been laboratory tested for compliance to all regional regulatory rules and carry CE, RCM and FCC approvals.
They are manufactured to the highest standards and are fully encapsulated to ensure maximum immunity to environmental degradation. Each probe is individually calibrated at the factory and will consistently provide reliable and repeatable data, year after year.
All of the EnviroPro range provide sensors located at 10cm intervals, and are compatible with any SDI-12 compliant logger. The communication interface may be changed to a CMOS output, either by the user, or at the factory. Other interfaces, like RS485 have been adapted, which may suit your application.
The unique EnviroPro® sub-surface Soil Probes can, depending on the model, measure moisture, temperature and salinity in one robust unit for economical and continuous monitoring and never need field re-calibration.
Applications include turf, trees, flowers, vegetables, vines, cane fields, grains and dry-land crops, and many other plantations,
Other applications include composting, mining, environmental monitoring and scientific research.
|Salinity resolution:||0.001 dS/m|
|Moisture accuracy:||+/- 2% @ 0% VWC to 50% VWC|
|Useable salinity range:||0 to 6 dS/m*
*Upper limit of non-contact capacitance sensors
|Salinity accuracy:||+/- 5% @ 0 to 4 dS/m
+/- 5% @ 10% to 30% VWC
|Temperature accuracy:||+/- 1 °C @ 25 °C|
|Units of Measure|
|Moisture:||Volumetric Water Content %|
|Temperature:||°C or °F|
|Operating and Electrical Specification|
|Interface:||SDI-12 version 1.3|
|Wiring:||Red: +6 to +15VDC
Yellow: Not connected (reserved for future use)
|Power Supply:||+6 to +15 VDC
Reverse voltage and lightning protected
|Operating temperature:||-20 to +60°C|
|Sleep:||0.1mA per sensor (0.4mA for 4 sensor probe)|
|Active current:||1mA per sensor (4mA for 4 sensor probe)|
|Measurement current:||64mA @150ms per sensor|
Available in 40, 80, 120, and 160cm lengths.