Handheld fluorometer for measuring in suspensions with integrated GPS module, USB/Bluetooth communication and dedicated software. Measured parameters: Ft, QY, OJIP, NPQ, LC. The “P“ version uses a submersible measuring probe.
It is equipped with a single blue LED emitter (optionally red or white), optically filtered and precisely focused to deliver light intensities of up to 3000 µmol(photon) m-2 s-1 to measured algal cultures.
The measurements are carried out by a submersible optical probe. The AquaPen-P excels in a high sensitivity – up to 0.5 µg Chl/l. Thus, it can measure even natural water samples containing low concentrations of phytoplankton. It can be used for both lab and field applications.
Data transfer is via USB or Bluetooth communication. Comprehensive FluorPen 1.0 software provides data transfer routines and many additional features for data presentation in tables and graphs. Parameters recorded by the AquaPen-P include FT, QY, NPQ, OJIP Analysis, and Light Curve.
|Measured/Calculated Parameters:||F0; FT; FM; FM’; QY; OJIP; NPQ 1,2; LC 1,2,3|
|Saturating Light:||Adjustable from 0 to 100% (up to 3,000 µmol (photon) m-2 s-1)|
|Actinic Light:||Adjustable from 0 to 100% (up to 1,000 µmol (photon) m-2 s-1)|
|Measuring Light:||Blue light; 0 to 0.03 µmol (photon) m-2 s-1; adjustable from 0 to 100% (up to 0.09 µmol (photon) m-2 per pulse)|
|Emitter:||Blue 470 nm LED (optionally red or white) – optically filtered and precisely focused|
|Optical Aperture Diameter:||8 mm|
|Detector Wavelength Range:||PIN photodiode with 667 to 750 nm bandpass filters|
|FluorPen Software Requirements:||Windows 2000, XP, or higher|
|Memory Capacity (16 Mb):||Ft: up to 149,000 measurements
QY: up to 95,000 measurements
LC1: up to 3,000 measurements
LC2: up to 3,500 measurements
LC3: up to 2,600 measurements
NPQ1: up to 800 measurements
NPQ2: up to 500 measurements
OJIP: up to 1,100 measurements
|Display:||2 x 8 characters LCD|
|Keypad:||Sealed, 2-key tactile response|
|Keypad Escape Time:||Turns off after 3 minutes of no use|
|Power Supply:||4 AAA alkaline or rechargeable batteries|
|Battery Life:||48 hours typical with full operation|
|Low Battery Detection:||Low battery indication displayed|
|Size:||140 x 55 x 50 mm; (5.5″ x 2.2″ x 2.0″)|
|Weight:||300 g, 10.6 oz|
|Sample Holder:||Submersible optical probe – 80 mm long; lightguide diameter 8 mm; lightguide end 15 mm in diameter|
|Operating Conditions:||0 to 55°C; 32 to 130°F. RH: 0 to 95% (non-condensing)|
|Storage Conditions:||-10 to 60°C; 14 to 140°F. RH: 0 to 95% (non-condensing)|
|Warranty:||1 year parts and labour|